Stage Cementer

Mechanical Stage Cementer

The MSC-A mechanical stage cementer features inner-closing configuration, in which the circulation ports are opened with free-fall or pumping-down plug. The closing plug drives the closing sleeve to shut the circulation ports.

Features

1.  With inner-closing structure, the MSC-A stage cementer can bring permanent self-locking after closing.

2.  The pressure –relief design prevents fluid trapping and compression between the opening device and the closing plug during the closing phase of the tool’s operation.

3.  The I.D. of upper/lower sub is the same with that of casing, but smaller than that of closing sleeve, which can minimize chances of damages to the closing sleeve.

4.  The inner seats are made of an easily drillable nitrile rubber/aluminum material. Both the opening and closing seats lock against rotation easy drillout.

5.  With pumping-down plug, it is used in the operation of continuous cementing.

Technical Parameters

Hydraulic Stage Cementer

The HSC-A hydraulic stage cementer features inner closing structure, opening through pressure difference. The closing plug drives the closing sleeve down and then shut circulation ports.

Features

1.  Opening pressure can be adjusted and it is not subjective to hole angle or mud properties for operation.

2.  The pressure-relief design prevents fluid trapping and compression during the closing phase of the tool’s operation.

3.  The I.D. of upper/lower sub is the same the as the casing, but smaller than that of closing sleeve, which can minimize chances of damages to the closing sleeve.

4.   The inner seats are made of an easily drillable butyronitrile rubber/aluminum material. Both the opening and closing seats lock against rotation for easy drillout.

Technical Parameters